Think & Tinker, Ltd.
P.O. Box 1606, Palmer Lake, CO 80133
Tel: (719) 488-9640, Fax: (866) 453-8473
Sales:, Support:

SkypeMe at
PREVIOUS navbutn.gif (1645 bytes) NEXT
Model 4200 Series Laminator Manual
Functions and Operation I

Functions and Operation
Soft-touch® Control Panel

A. Indicator lamps
Specific lamps are illuminated to indicate the state of one or more of the operating parameters of the laminator.

Temperature Indicator - displays the target operating temperature. Also used to display the current fusion roll temperature when the MEASURE function is selected.
Roller Speed Indicator - displays the current "running speed" of the lamination rollers
COLD Indicates that the current chosen pre-set function is COLD (room temperature) lamination. (temp. = RT , speed = 2 )
MEAS Indicates that the MEASURE (MEAS) function has been selected and the temperature indicator is displaying the current temperature of the fusion rollers.
PREHT Indicates that the PRE-HEAT (PREHT) function has been selected. (temp. = 80°C, speed = 2 )
HOT Indicates that the HOT function has been selected. (temp. = 90°C, speed = 5)
MOUNT Indicates that the MOUNTING (MOUNT) function is selected. (temp. = 130°C, speed = 1)
CARRI Indicates that the MATTING (MOUNT) function is selected. (temp. = 110°C, speed = 2)
READY Indicates the state of the rollers. Changes state according to the temperature of the rollers as follows:
OFF - the temperature of the fusion rollers is below the set point
BLINKING - the temperature of the fusion rollers is above the set point
ON - the temperature of the fusion rollers is at the set point (+/- 3°C)

PREVIOUS navbutn.gif (1645 bytes) NEXT

Established 1990

On the web since 1994

Payment Processing
Sales: 1-(719) 488-9640    Tech Support: 1-(719) 488-9640    Fax: 1-(866) 453-8473
Copyright © 1994 - 2014 Think & Tinker, Ltd. Updated 2/13/2014 8:36:56 AM