|
Think & Tinker, Ltd.
P.O. Box 1606, Palmer Lake, CO 80133 Tel: (719) 488-9640, Fax: (866) 453-8473 Sales: Sales@ThinkTink.com, Support: Support@ThinkTink.com |
|||||||
|
Think
& Tinker Ltd.
  SkypeMe at "thinkntink" |
Cutter compensation - How to lie to your machine, but still be friends
Anytime you will be putting parts together, whether for artistic inlay or for interlocking machine components, you have to leave a little bit of space for things to work together. In the case of inlay, you have to create enough space to allow the part to be inserted into the pocket without excessive force, and leave a wide enough gap between the pocket and the part to allow excess glue to squeeze out during final assembly. |
||||||
|
|||||||
Home
