Think & Tinker, Ltd.
P.O. Box 1606, Palmer Lake, CO 80133
Tel: (719) 488-9640, Fax: (866) 453-8473
Sales: Sales@ThinkTink.com, Support: Support@ThinkTink.com
Think
&
Tinker
Ltd.





SkypeMe at
"thinkntink"

Reflector Fabrication

  1. Apply 1/2" wide double-backed adhesive (3M 467) to both edges of the inner surface of each semi-cylinder.
  2. Mount the reflector to the semi-cylinders (mylar side facing the tube lamp), by carefully aligning one edge of the mylar to an edge of a trough and pressing firmly into the adhesive strip.
  3. Conform the mylar to the surface of the trough and press the second edge into the opposing adhesive strip.
  4. Repeat this operation for each cylindrical reflector.


Established 1990

On the web since 1994

Payment Processing
Sales: 1-(719) 488-9640    Tech Support: 1-(719) 488-9640    Fax: 1-(866) 453-8473
Copyright © 1994 - 2014 Think & Tinker, Ltd. Updated 2/13/2014 8:36:56 AM