|
Think & Tinker, Ltd.
P.O. Box 1606, Palmer Lake, CO 80133
Tel: (719) 488-9640, Fax: (866) 453-8473
Sales: Sales@thinktink.com, Support: Support@thinktink.com
|
|
Think
&
Tinker
Ltd.
SkypeMe at
"thinkntink"
|
Tel.: (719) 488-9640
Fax: (719) 481-0464
Think & Tinker, Ltd.
Carbide Cutting Tools
Specifications
Specifications:
- Bit geometry: 1/8 in. (3.175mm) shank, 1.50 in. (38.1 mm) long
- Material: Sandvik submicrograin tungsten carbide
- Depth setting ring, if installed, are positioned at 0.800" +/- 0.005" relative to the tip of the bit.
- Bits are available in plastic packs that contain 10 bits of a given size or available as "loose bits" if you do not need 10 bits of a single size.
|
 |
Established 1990
On the web since 1994
|
Sales: 1-(719) 488-9640 Tech Support: 1-(719) 488-9640 Fax: 1-(866) 453-8473
Copyright © 1994 - 2014 Think & Tinker, Ltd.
|
|
Home